Navico Electronic Fuel Flow Sensor with T-connector & 10ft Cable
PART NUMBER: 000-11517-001
Description
Track Fuel Flow, Tank Fuel Used, Trip Fuel Used and Seasonal Fuel Used for a gasoline engine with the Lowrance Fuel Flow Sensor, which has a 10-foot cable and comes with a T-connector for easy integration into a NMEA 2000 network.
*Please note: The Fuel Flow Sensor does not operate diesel engine fuel systems.
Features
Fuel Flow
Tank Fuel Used
Trip Fuel Used
Seasonal Fuel Used
One required per engine
Up to 3 engines supported
Fuel line diameter: 3/8" (9.5 mm) ID
Flow rate measured: Optimized for 0.6-45 Gal/hr but can measure outside these values
Added back pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
Installation location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
Fuel type: Gasoline only*
Hole required to route through a bulkhead: 22mm (7/8")
Multiple fuel flow sensors possible
What's in the Package?
Navico Electronic Fuel Flow Sensor with T-connector & 10ft Cable
Comes in Retail Packaging so makes a Great Gift.
Buy with Confidence & All Purchases come with a VAT Receipt by email.