Gorilla Grab Adhesive Crystal Clear is versatile, clean, clear and professional. 5 x stronger than our heavy duty formula, this is our strongest grab adhesive yet!

It�s 100% waterproof, temperature resistant and bonds virtually anything! The gap filling formula also fills voids with little or no shrinkage.

PREPARE

All surfaces should be clean and free of dirt, grease, and oil.

Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut to desired bead size. If using cartridge insert into cartridge gun.

1. APPLY

Squeeze Gorilla Heavy Duty Grab Adhesive Crystal Clear on to one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5�C.

2. PRESS

Within 5 minutes, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening. Full cure achieved in 24 hours.

STORAGE

Remove excess adhesive from nozzle with a dry cloth. Keep nozzle attached and replace cap tightly to prevent adhesive from curing. Store in a cool, dry place. To re-use product, unscrew nozzle and clean out cured adhesive.