Instructions for Use: This hot water bottle is made from natural rubber. For safe use and to obtain the maximum life of this hot water bottle, you should observe the following instructions. When filling this hot water bottle do not use boiling water and fill to a maximum of two-thirds capacity or less. Do not overfill as this might cause the bottle to burst. Hold the bottle by the neck in an upright position and fill slowly to avoid hot water splashing back. Expel air from the bottle by lowering it carefully onto a flat surface until water appears at the opening. Screw the stopper sufficiently tight to ensure that there is no leakage. Finger-tight should be adequate. Finally, make sure the funnel is empty. If there is a possibility that prolonged contact with the skin could occur, an adequate cover should be used to prevent burns. Under no circumstances should the hot water bottle be used as a cushion and be sat on. Do not fill using the water from a domestic hot water system as this can considerably shorten the life of the hot water bottle. Prevent contact with hot surfaces. Prevent contact with oil or grease. Do not place anything on top of the bottle during storage. Check the bottle and stopper for wear and damage prior to use. Stop using immediately at the first signs of wear, damage or perishing. Using the bottle every day for prolonged periods of time can shorten its lifespan. Only use the stopper provided with this bottle, using another stopper could potentially compromise the bottle's integrity. When using a Cassandra back opening cover with this bottle, always place the opening of the cover face down if using in a bed. Always ensure that the cover is completely closed with the hook and loop fixings before use, to prevent the bottle becoming exposed. Even when using the bottle with a cover you should take precautions not to have direct prolonged contact with the same area of skin. For bottles with covers included - If there are decorative parts such as ribbons, please remove these before use.

Safety Warning

When filling this hot water bottle do not use boiling water and fill to a maximum of two-thirds capacity. Hold the bottle by the neck in an upright position and fill slowly to avoid hot water splashing back. Expel air from the bottle by lowering it carefully onto a flat surface until water appears at the opening. Screw the stopper sufficiently tight to ensure that there is no leakage. Finger tight should be adequate. Do not fill using water from a domestic hot water system as this can considerably shorten the life of the hot water bottle. Prevent contact with hot surfaces. Prevent contact with oil or grease. When not in use drain completely and keep with the stopper removed in a cool, dry dark place. Prevent exposure to sun light. Do not place anything on top of the bottle. Check the bottle and stopper for wear and damage at regular intervals. WARNING: Hot water bottles can cause burns. Avoid prolonged direct contact with the skin.