Important
Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon).
Make sure surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen surfaces with sandpaper and degrease metals with a suitable solvent. During assembly apply light pressure to the joint until set (clamps, tape) around 20 minutes. Allow 2 hours to attain full strength before rough handling or sanding.
How to apply
Araldite Rapid is a strong 2-component epoxy with fast setting. Parts repositionable for 4 minutes. High temperature resistance (-30C to 80C). Oil, chemical and impact resistant. Do not use to repair or bond items that will contact food or drink. Not recommended for bonding rear-view mirrors to car windscreens.
Storage
Should be stored in a dry place at room temperature in the original syringe.
New
Environmentally friendly product formulation plus eco-friendly packaging for easy recycling.
