PART NUMBER: 9-92001
This hot air unit can be used for both hot cabin heating and windscreen demisting. Designed on the same principle as a vehicle heater but larger and to marine material specification for connection to your closed circuit fresh water cooling system. As heat loss in pipes from engine is negligible the unit is best sited near to the cabin. Universal mounting normally below engine header tank. The radiator, fan and electric motor are housed in rectangular S/S body. Remote external air supply can by used by S/S adaptor which fits rear of heater to take 2 x 89mm ID ducting, as illustrated right.
Marine warm air cabin heaters are designed to be connected to the engine closed cooling circuit. The heater works in a similar way to a heater in a car or any other vehicle, but it is larger and is made from tougher, marine grade materials.
The robust radiator, fan and heater matrix are contained in a stainless steel housing. Each heater unit has four outlets and there are a range of optional extras to suit.
Marine cabin heaters provide hot air to heat cabins and demist screens. It is supplied with a switch for 3 different positions.
| Brand | AG |
| Motor | 100 Watt |
| Free blowing | 10kw |
| 3 Bar B/ Pressure | 6.5kw |
| 3.5 Bar B/ Pressure | 4kw |
| Material | Stainless Steel Housing |
| Inlet Outlet Port Size | Water Inlet/Outlet: 16mm (5/8"), Air Outlets: 4 x 55mm Diameter |
| Voltage | 24V DC |
| Wattage | Motor: 100W, Free Blowing: 10kW |
| Amps | Average Current Draw: 8.3A |
| Fuse | Recommended fuse 10A |
| Size (mm) | 450x140x335 |
