PART NUMBER: NGW-1-STNG
Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices. The NGW-1 range provides an uncomplicated way to link between a boat’s data networks and converts NMEA 0183 data into NMEA 2000 data and vice-versa.
NMEA 0183 to Raymarine STNG Gateway - Bare wires to STNG (Includes NMEA 2000 to STNG Cable)
Fully NMEA 2000 Certified
The NGW-1 has the largest range of conversions available on the market. To see a full up to date list of the conversions the various configurations can handle, please click here.
The Actisense NMEA Reader software utility allows the NGW-1 user to view and understand (in detail) the translated NMEA 0183 sentences output by an NGW-1 directly.
BENEFITS
Power Supply (ISO, ISO-AIS & STNG Variants) | |
Supply Voltage (NMEA 2000 Port) | 9.5 to 35V DC |
Supply Current (NMEA 2000 Port) | 35mA @ 12V DC, Max 50mA |
Load Equivalent Number (LEN) | 1 |
NMEA 2000 Port (All Variants) | |
Compatibility | Fully NMEA 2000 certified |
Speed / Baud Rate | 250kbps |
Connectivity | M12 Male (A polarised) connector moulded on cable |
Cable Length NMEA 2000 | 1.5m |
Cable Length STNG Adapter | 0.4m (1.9m with NMEA 2000 cable connected) |
ISO Port (NMEA 0183 port – ISO, ISO-AIS & STNG Variants) | |
Compatibility | Full NMEA 0183, RS232 & RS422 compatible. RS485 Listener compatible |
Speed/Baud Rate | 4800 to 115200 Baud |
Output Voltage Drive | >= 2.1V (differential) into 100Ω |
Output Current Drive | 20mA max. |
Output Protection | Short circuit and ESD |
Input Voltage Tolerance | -15V to +15V continuous -35V to +35V short term (< 1 second) |
Input Protection | Current limited and overdrive protection to 40VDC |
Connectivity | 5mm stripped and tinned wire |
Cable Length | 1.5m |
Isolation | |
NMEA 2000 Port to ISO Port | Uses IsoDriveTM, Hi-Pot tested to 1000V |
Mechanical | |
Housing Material Lid | Polycarbonate |
Housing Material Base | Flame retardent ABS |
Weight NGW-1-STNG | 260g |
Approvals and Certifications | |
Fully NMEA 2000 Certified | |
Meets all IEC 61162-1 & 61162-2 requirements | |
Meets all IEC 61162-3 requirements | |
EMC | IEC 60945 (sections 9, 10 & 11.2) |
Environmental Protection | IP54 |
Operating Temperature | -20°C to +55°C |
Storage Temperature | -30°C to +70°C |
Recommended Humidity | 0 – 93% RH |